View 74LVC06ABQ_5518301.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

d a t a sh eet product speci?cation supersedes data of 2003 aug 28 2003 nov 27 integrated circuits 74lvc06a hex inverter with open-drain outputs
2003 nov 27 2 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a features 5 v tolerant inputs and outputs (open drain) for interfacing with 5 v logic wide supply voltage range from 1.65 to 5.5 v cmos low power consumption direct interface with ttl levels inputs accept voltages up to 5 v complies with jedec standard no. 8-1a esd protection: hbm eia/jesd22-a114-a exceeds 2000 v mm eia/jesd22-a115-a exceeds 200 v. description the 74lvc06a is a high-performance, low-power, low-voltage, si-gate cmos device, superior to most advanced cmos compatible ttl families. inputs can be driven from either 3.3 or 5 v devices. this feature allows the use of these devices as translators in a mixed 3.3 to 5 v environment. the 74lvc06a provides six inverting buffers. the outputs of the 74lvc06a are open drain and can be connected to other open-drain outputs to implement active-low wired-or or active-high wired-and functions. quick reference data gnd = 0 v; t amb =25 c; t r =t f 2.5 ns. notes 1. c pd is used to determine the dynamic power dissipation (p d in m w). p d =c pd v cc 2 f i n+ s (c l v cc 2 f o ) where: f i = input frequency in mhz; f o = output frequency in mhz; c l = output load capacitance in pf; v cc = supply voltage in volts; n = total load switching outputs; s (c l v cc 2 f o ) = sum of the outputs. 2. the condition is v i = gnd to v cc . function table see note 1. note 1. h = high voltage level; l = low voltage level; z = high-impedance off-state. symbol parameter conditions typical unit t plz /t pzl propagation delay na to ny c l = 50 pf; v cc = 3.3 v 2.3 ns c i input capacitance 5.0 pf c pd power dissipation capacitance per gate v cc = 3.3 v; notes 1 and 2 8.0 pf input output na ny lz hl
2003 nov 27 3 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a ordering information pinning type number package temperature range pins package material code 74lvc06ad - 40 to +125 c 14 so14 plastic sot108-1 74lvc06apw - 40 to +125 c 14 tssop14 plastic sot402-1 74LVC06ABQ - 40 to +125 c 14 dhvqfn14 plastic sot762-1 pin symbol description 1 1a data input 2 1y data output 3 2a data input 4 2y data output 5 3a data input 6 3y data output 7 gnd ground (0 v) 8 4y data output 9 4a data input 10 5y data output 11 5a data input 12 6y data output 13 6a data input 14 v cc supply voltage handbook, halfpage 06 mna524 1 2 3 4 5 6 7 1a 1y 2a 2y 3a 3y gnd v cc 6a 6y 5a 5y 4a 4y 14 13 12 11 10 9 8 fig.1 pin configuration (so14 and tssop14). handbook, halfpage 114 gnd (1) 1a v cc 7 2 3 4 5 6 1y 2a 2y 3a 3y 13 12 11 10 9 6a 6y 5a 5y 4a 8 gnd top view 4y mbl760 fig.2 pin configuration (dhvqfn14). (1) the die substrate is attached to this pad using conductive die attach material. it can not be used as a supply pin or input.
2003 nov 27 4 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a mna525 handbook, halfpage 2 11a 1y 4 32a 2y 6 53a 3y 8 94a 4y 10 11 5a 5y 12 13 6a 6y fig.3 logic symbol. mna526 handbook, halfpage 1a 2a 3a 4a 5a 6a 1y 2y 3y 4y 5y 6y 2 1 1 4 3 6 5 8 9 10 11 12 13 1 1 1 1 1 fig.4 iec logic symbol. mna527 handbook, halfpage gnd a y fig.5 logic diagram (one gate).
2003 nov 27 5 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a recommended operating conditions limiting values in accordance with the absolute maximum rating system (iec 60134); voltages are referenced to gnd (ground = 0 v). notes 1. the input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. for so14 packages: above 70 c derate linearly with 8 mw/k. for tssop14 packages: above 60 c derate linearly with 5.5 mw/k. for dhvqfn14 packages: above 60 c derate linearly with 4.5 mw/k. symbol parameter conditions min. max. unit v cc supply voltage 1.65 5.5 v v i input voltage 0 5.5 v v o output voltage active mode 0 5.5 v high-impedance mode 0 5.5 v t amb operating ambient temperature - 40 +125 c t r ,t f input rise and fall ratios v cc = 1.65 to 2.7 v 0 20 ns/v v cc = 2.7 to 5.5 v 0 10 ns/v symbol parameter conditions min. max. unit v cc supply voltage - 0.5 +6.5 v i ik input diode current v i <0 -- 50 ma v i input voltage note 1 - 0.5 +6.5 v i ok output clamping diode current v o <0 -- 50 ma v o output voltage active mode; note 1 - 0.5 +6.5 v high-impedance mode; note 1 - 0.5 +6.5 v i o output source or sink current v o =0tov cc - 50 ma i cc ,i gnd v cc or gnd current - 100 ma t stg storage temperature - 65 +150 c p tot power dissipation t amb = - 40 to +125 c; note 2 - 500 mw
2003 nov 27 6 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a dc characteristics at recommended operating conditions; voltages are referenced to gnd (groun d=0v). symbol parameter test conditions min. typ. (1) max. unit other v cc (v) t amb = - 40 to +85 c v ih high-level input voltage 1.65 to 1.95 v cc -- v 2.3 to 2.7 1.7 -- v 2.7 to 3.6 2.0 -- v 4.5 to 5.5 0.7 v cc -- v v il low-level input voltage 1.65 to 1.95 -- gnd v 2.3 to 2.7 -- 0.7 v 2.7 to 3.6 -- 0.8 v 4.5 to 5.5 -- 0.30 v cc v v ol low-level output voltage v i =v ih or v il i o = 100 m a 1.65 to 5.5 -- 0.20 v i o = 4 ma 1.65 -- 0.45 v i o = 8 ma 2.3 -- 0.3 v i o = 12 ma 2.7 -- 0.4 v i o = 24 ma 3.0 -- 0.55 v i o = 32 ma 4.5 -- 0.55 v i li input leakage current v i = 5.5 v or gnd 1.65 to 5.5 - 0.1 5 m a i oz output leakage current v i =v ih ; v o = 5.5 v or gnd 1.65 to 5.5 - 0.1 10 m a i off power-off leakage current v i or v o = 5.5 v 0 - 0.1 10 m a i cc quiescent supply current v i =v cc or gnd; i o =0 5.5 - 0.1 10 m a d i cc additional quiescent supply current per input pin v i =v cc - 0.6 v; i o =0 2.3 to 5.5 - 5 500 m a t amb = - 40 to +125 c v ih high-level input voltage 1.65 to 1.95 0.65 x v cc -- v 2.3 to 2.7 1.7 -- v 2.7 to 3.6 2.0 -- v 4.5 to 5.5 0.7 v cc -- v v il low-level input voltage 1.65 to 1.95 -- 0.35 v cc v 2.3 to 2.7 -- 0.7 v 2.7 to 3.6 -- 0.8 v 4.5 to 5.5 -- 0.30 v cc v
2003 nov 27 7 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a note 1. all typical values are measured at v cc = 3.3 v and t amb =25 c. ac characteristics gnd = 0 v; t r =t f 2 ns for v cc 2.7 v and t r =t f 2.5 ns for v cc 3 2.7 v. notes 1. all typical values are measured at t amb =25 c. 2. typical value is measured at v cc = 3.3 v. v ol low-level output voltage v i =v ih or v il i o = 100 m a 1.65 to 5.5 -- 0.20 v i o = 4 ma 1.65 -- 0.45 v i o = 8 ma 2.3 -- 0.3 v i o = 12 ma 2.7 -- 0.4 v i o = 24 ma 3.0 -- 0.55 v i o = 32 ma 4.5 -- 0.55 v i li input leakage current v i = 5.5 v or gnd 1.65 to 5.5 -- 5 m a i oz output leakage current v i =v ih ; v o = 5.5 v or gnd 1.65 to 5.5 -- 10 m a i off power-off leakage current v i or v o = 5.5 v 0 -- 10 m a i cc quiescent supply current v i =v cc or gnd; i o =0 5.5 -- 10 m a d i cc additional quiescent supply current per input pin v i =v cc - 0.6 v; i o =0 2.3 to 5.5 -- 500 m a symbol parameter test conditions min. typ. max. unit waveforms v cc (v) t amb = - 40 to +85 c; note 1 t plz /t pzl propagation delay na to ny see figs 6 and 7 1.65 to 1.95 - 2.9 - ns 2.3 to 2.7 0.5 1.8 3.1 ns 2.7 0.5 2.5 3.9 ns 3.0 to 3.6 0.5 2.3 (2) 3.7 ns 4.5 to 5.5 0.5 1.7 3.4 ns t amb = - 40 to +125 c t plz /t pzl propagation delay na to ny see figs 6 and 7 1.65 to 1.95 --- ns 2.3 to 2.7 0.5 - 4.0 ns 2.7 0.5 - 5.0 ns 3.0 to 3.6 0.5 - 5.0 ns 4.5 to 5.5 0.5 - 4.5 ns symbol parameter test conditions min. typ. (1) max. unit other v cc (v)
2003 nov 27 8 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a ac waveforms handbook, full pagewidth mna529 t plz v x ny output na input v i v cc v m v ol gnd t pzl v m v cc v m v x <2.7 v 0.5 v cc v ol + 0.15 v 3 2.7 to 3.6 v 1.5 v v ol + 0.3 v 3 4.5 to 5.5 v 0.5 v cc v ol + 0.3 v fig.6 the input na to output ny propagation delays.
2003 nov 27 9 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a handbook, full pagewidth mna530 v cc v i v o v ext d.u.t. c l r t r l r l pulse generator v cc v ext v i c l r l 1.65 to 1.95 v 2 v cc v cc 30 pf 1 k w 2.3 to 2.7 v 2 v cc v cc 30 pf 500 w 2.7 v 6 v 2.7 v 50 pf 500 w 3.0 to 3.6 v 6 v 2.7 v 50 pf 500 w 4.5 to 5.5 v 2 v cc v cc 50 pf 500 w fig.7 load circuitry for switching times. definitions for test circuit: r l = load resistor. c l = load capacitance including jig and probe capacitance. r t = termination resistance should be equal to the output impedance z o of the pulse generator.
2003 nov 27 10 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a package outlines unit a max. a 1 a 2 a 3 b p cd (1) e (1) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 0 o o 0.25 0.1 dimensions (inch dimensions are derived from the original mm dimensions) note 1. plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 sot108-1 x w m q a a 1 a 2 b p d h e l p q detail x e z e c l v m a (a ) 3 a 7 8 1 14 y 076e06 ms-012 pin 1 index 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.35 0.34 0.16 0.15 0.05 1.05 0.041 0.244 0.228 0.028 0.024 0.028 0.012 0.01 0.25 0.01 0.004 0.039 0.016 99-12-27 03-02-19 0 2.5 5 mm scale so14: plastic small outline package; 14 leads; body width 3.9 mm sot108-1
2003 nov 27 11 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a unit a 1 a 2 a 3 b p cd (1) e (2) (1) eh e ll p qz y w v q references outline version european projection issue date iec jedec jeita mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.72 0.38 8 0 o o 0.13 0.1 0.2 1 dimensions (mm are the original dimensions) notes 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 sot402-1 mo-153 99-12-27 03-02-18 w m b p d z e 0.25 17 14 8 q a a 1 a 2 l p q detail x l (a ) 3 h e e c v m a x a y 0 2.5 5 mm scale tssop14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm sot402-1 a max. 1.1 pin 1 index
2003 nov 27 12 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a terminal 1 index area 0.5 1 a 1 e h b unit y e 0.2 c references outline version european projection issue date iec jedec jeita mm 3.1 2.9 d h 1.65 1.35 y 1 2.6 2.4 1.15 0.85 e 1 2 0.30 0.18 0.05 0.00 0.05 0.1 dimensions (mm are the original dimensions) sot762-1 mo-241 - - - - - - 0.5 0.3 l 0.1 v 0.05 w 0 2.5 5 mm scale sot762-1 dhvqfn14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm a (1) max. a a 1 c detail x y y 1 c e l e h d h e e 1 b 26 13 9 8 7 1 14 x d e c b a 02-10-17 03-01-27 terminal 1 index area a c c b v m w m e (1) note 1. plastic or metal protrusions of 0.075 mm maximum per side are not included. d (1)
2003 nov 27 13 philips semiconductors product speci?cation hex inverter with open-drain outputs 74lvc06a data sheet status notes 1. please consult the most recently issued data sheet before initiating or completing a design. 2. the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semiconductors.philips.com. 3. for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. level data sheet status (1) product status (2)(3) definition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn). definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. disclaimers life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change notification (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
? koninklijke philips electronics n.v. 2003 sca75 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owne r. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not con vey nor imply any license under patent- or other industrial or intellectual property rights. philips semiconductors C a worldwide company contact information for additional information please visit http://www.semiconductors.philips.com . fax: +31 40 27 24825 for sales of?ces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com . printed in the netherlands r20/03/pp 14 date of release: 2003 nov 27 document order number: 9397 750 12264

▲Up To Search▲

Price & Availability of 74LVC06ABQ

	To Download 74LVC06ABQ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .